SlackBuilds Repository

14.2 > Ham > demorse (1.2)

demorse is a Morse code decoding application for the console. It 
detects the receiver's audio output via the computer's sound card,
using simple dsp techniques, and then decodes the mark/space
sequence into characters which are printed on the console screen.
demorse has some tolerance to bad operator "fists" and noise or
interference. demorse can measure and adapt to the Morse transmission's
speed within the range of 10-30 words per minute, the default
starting speed being set to about 20 wpm.

Maintained by: JK Wood
Keywords: morse,code,morse code,decode,decoder,cw
ChangeLog: demorse

Homepage:
http://www.qsl.net/5b4az/

Source Downloads:
demorse-1.2.tar.bz2 (d4800b759ef4c8ffb6e73d173bcd563b)

Download SlackBuild:
demorse.tar.gz
demorse.tar.gz.asc (FAQ)

(the SlackBuild does not include the source)

Individual Files:
README
demorse.SlackBuild
demorse.info
slack-desc

Validated for Slackware 14.2

See our HOWTO for instructions on how to use the contents of this repository.

Access to the repository is available via:
ftp git cgit http rsync

© 2006-2018 SlackBuilds.org Project. All rights reserved.
Slackware® is a registered trademark of Patrick Volkerding
Linux® is a registered trademark of Linus Torvalds
Web Design by WebSight Designs |  Managed Hosting by OnyxLight Communications