SlackBuilds Repository

13.0 > Audio > shorten (3.6.1)

shorten reduces the size of waveform files (such as audio) using
Huffman coding of prediction residuals and optional additional
quantisation. In lossless mode the amount of compression obtained
depends on the nature of the waveform. Those composing of low
frequencies and low amplitudes give the best compression, which may
be 2:1 or better. Lossy compression operates by specifying a minimum
acceptable segmental signal to noise ratio or a maximum bit rate. Lossy
compression operates by zeroing the lower order bits of the waveform,
so retaining waveform shape.

Maintained by: slakmagik
Approved by: dsomero
Keywords: audio,compression,wave,waveform,wav

Homepage:
http://shnutils.freeshell.org/shorten/

Source Downloads:
shorten-3.6.1.tar.gz (fb59c16fcedc4f4865d277f6e45866a7)

Download SlackBuild:
shorten.tar.gz
shorten.tar.gz.asc (FAQ)

(the SlackBuild does not include the source)

Individual Files:
README
shorten.SlackBuild
shorten.info
slack-desc

See our HOWTO for instructions on how to use the contents of this repository.

Access to the repository is available via:
ftp git cgit http rsync

[  Exec: 0.0276 sec  |  Load: 0.01 0.05 0.06  ]

© 2006-2014 SlackBuilds.org Project. All rights reserved.
Slackware® is a registered trademark of Patrick Volkerding
Linux® is a registered trademark of Linus Torvalds
Web Design by WebSight Designs |  Managed Hosting by OnyxLight Communications