SlackBuilds Repository

13.0 > Audio > tuneit (0.3)

tuneit (A simple command-line instrument tuner)

Tune-it uses two different algorithms for pitch detection. By default,
a simple and fast Schmitt Trigger based algorithm is used to detect the
fundamental frequency of an instrument. For better and more reliable
results, there is an alternative FFT based algorithm which is much more
CPU intensive.

As audio capture backends, ALSA and JACK are supported. By default, tuneit
will try to use the hw:0,0 ALSA device.

This requires fftw. jack is an optional dependency, but enabled by default
in this build script. If you don't want jack support, then run the script
with USE_JACK=no in the build environment.

Tip: Unless you're on a really slow ancient system, you probably want
to always run tuneit with the -f option.

Maintained by: B. Watson
Approved by: rworkman
Keywords: guitar,jack,studio,tuner,music

Homepage:
http://delysid.org/tuneit.html

Source Downloads:
tuneit-0.3.tar.gz (b22dcdc92982bcf56c4ae85d6b8e9b3b)

Download SlackBuild:
tuneit.tar.gz
tuneit.tar.gz.asc (FAQ)

(the SlackBuild does not include the source)

See our HOWTO for instructions on how to use the contents of this repository.

Access to the repository is available via:
ftp git cgit http rsync

[  Exec: 0.0287 sec  |  Load: 0.22 0.12 0.13  ]

© 2006-2014 SlackBuilds.org Project. All rights reserved.
Slackware® is a registered trademark of Patrick Volkerding
Linux® is a registered trademark of Linus Torvalds
Web Design by WebSight Designs |  Managed Hosting by OnyxLight Communications