SlackBuilds Repository

13.0 > Network > asterisk (1.6.1.6)

Asterisk has a number of optional build dependencies. If you intend to
use any analogue PSTN hardware such as DigiumTDM400P, you should install
the dahdi-linux and dahdi-tools software and drivers before compiling
Asterisk. If you will instead use digital telephony hardware (not IP
phones) such as T1/E1 lines or a PRI, you'll need to install libpri,
again before compiling Asterisk.

Be sure to see /usr/doc/asterisk-1.6.1.6/sample_confs/ after installation
for any additional configuration files you may need.

Maintained by: Alan Hicks
Approved by: rworkman
Keywords: voip,sip,iax,voice,asterisk,phone,pstn,pots,telephony

Homepage:
http://www.asterisk.org

Source Downloads:
asterisk-1.6.1.6.tar.gz (63a928373e741524aac09d8c078df7d5)

Download SlackBuild:
asterisk.tar.gz
asterisk.tar.gz.asc (FAQ)

(the SlackBuild does not include the source)

See our HOWTO for instructions on how to use the contents of this repository.

Access to the repository is available via:
ftp git cgit http rsync

[  Exec: 0.0327 sec  |  Load: 0.25 0.11 0.06  ]

© 2006-2014 SlackBuilds.org Project. All rights reserved.
Slackware® is a registered trademark of Patrick Volkerding
Linux® is a registered trademark of Linus Torvalds
Web Design by WebSight Designs |  Managed Hosting by OnyxLight Communications