SlackBuilds Repository

13.0 > Network > dahdi-tools (2.2.0)

The dahdi drivers and binaries are needed to use popular digital and
analogue telephony equipment and are typically installed alongside the
asterisk PBX (although these are not required for asterisk if you are
not using any hardware to interface with the POTS/PSTN system). Note
that if you change your kernel after installing any dahdi components,
you'll have to re-compile dahdi-linux (a simple re-install will not
suffice), but may be able to keep your existing dahdi-tools package.

After installing dahdi-tools, all the modules for digium telephony cards
will be blacklisted in /etc/modprobe.d/dahdi.blacklist.conf - this is
intentional to allow you to load modules in a specific order in rc.local.

This requires dahdi-linux.

Maintained by: Alan Hicks
Approved by: rworkman
Keywords: asterisk,voip,sip,iax,telephony,dahdi

Homepage:
http://www.digium.com

Source Downloads:
dahdi-tools-2.2.0.tar.gz (a018f452f3851a312ff51705ac44de37)

Download SlackBuild:
dahdi-tools.tar.gz
dahdi-tools.tar.gz.asc (FAQ)

(the SlackBuild does not include the source)

See our HOWTO for instructions on how to use the contents of this repository.

Access to the repository is available via:
ftp git cgit http rsync

[  Exec: 0.0302 sec  |  Load: 0.23 0.18 0.14  ]

© 2006-2014 SlackBuilds.org Project. All rights reserved.
Slackware® is a registered trademark of Patrick Volkerding
Linux® is a registered trademark of Linus Torvalds
Web Design by WebSight Designs |  Managed Hosting by OnyxLight Communications