This script is for Slackware 14.1 and may be outdated.

SlackBuilds Repository

14.1 > Development > osmo-sdr (0.1)

OsmoSDR is a 100% Free Software based small form-factor 
inexpensive SDR (Software Defined Radio) project.

If you are familiar with existing SDR receivers,
then OsmoSDR can be thought of something in between
a ​FunCube Dongle (only 96kHz bandwidth) and a USRP
(much more expensive).
For a very cheap SDR (with limited dynamic range),
you can use the DVB-T USB stick using the RTL2832U chip,
as documented in rtl-sdr.

It consists of a USB-attached Hardware, associated Firmware
as well as GrOsmoSDR gnuradio integration on the PC.

Maintained by: Panagiotis Nikolaou
Keywords: gnuradio,sdr,osmo-sdr
ChangeLog: osmo-sdr

Homepage:
http://sdr.osmocom.org/trac/

Source Downloads:
osmo-sdr-0.1.tar.gz (79351554ec5cff043de17386215f59c3)

Download SlackBuild:
osmo-sdr.tar.gz
osmo-sdr.tar.gz.asc (FAQ)

(the SlackBuild does not include the source)

Individual Files:
README
osmo-sdr.SlackBuild
osmo-sdr.info
slack-desc

Validated for Slackware 14.1

See our HOWTO for instructions on how to use the contents of this repository.

Access to the repository is available via:
ftp git cgit http rsync

© 2006-2019 SlackBuilds.org Project. All rights reserved.
Slackware® is a registered trademark of Patrick Volkerding
Linux® is a registered trademark of Linus Torvalds
Web Design by WebSight Designs |  Managed Hosting by OnyxLight Communications