SlackBuilds Repository

14.1 > System > read-edid (3.0.1)

read-edid (read EDID information from a video monitor)

read-edid is a pair of tools (originally by John Fremlin) for reading the
EDID from a monitor. It should work with most monitors made since 1996
(except for newer ones with 256-byte EDID's - WiP), assuming the video
card supports the standard read commands (most do).read-edid is a set
of two tools - get-edid, which gets the raw edid information from the
monitor, and parse-edid, which turns the raw binary information into an
XF86Config-compatible monitor section.

Maintained by: B. Watson
Keywords: vbe,vesa,bios,video,vga,get-edid,parse-edid

Homepage:
http://www.polypux.org/projects/read-edid/

Source Downloads:
read-edid-3.0.1.tar.gz (81f6a57162127ab9e969da53bc290e63)

Download SlackBuild:
read-edid.tar.gz
read-edid.tar.gz.asc (FAQ)

(the SlackBuild does not include the source)

Individual Files:
README
read-edid.SlackBuild
read-edid.info
slack-desc

See our HOWTO for instructions on how to use the contents of this repository.

Access to the repository is available via:
ftp git cgit http rsync

[  Exec: 0.0279 sec  |  Load: 0.08 0.09 0.13  ]

© 2006-2014 SlackBuilds.org Project. All rights reserved.
Slackware® is a registered trademark of Patrick Volkerding
Linux® is a registered trademark of Linus Torvalds
Web Design by WebSight Designs |  Managed Hosting by OnyxLight Communications