SlackBuilds Repository

15.0 > System > apcupsd (3.14.14)

APCUPSD can be used for power management and controlling most of APC's
UPS models on Unix and Windows machines. Apcupsd works with most of
APC's Smart-UPS models as well as most simple signalling models such
as Back-UPS and BackUPS-Office.

This buildscript veers from the "accepted" installation of apcupsd,
but for what I believe you'll see are justifiable reasons. The stock
install of apcupsd detects its presence on Slackware and attempts to
patch the system's /etc/rc.d/rc.6 script and places the rc.apcupsd
script inside /etc/rc.d (instead of DESTDIR/etc/rc.d - in essence, it
touches files outside DESTDIR). I don't view this as even remotely
acceptable, so the build script disables the distribution-specific
installation to prevent messing with files outside DESTDIR;
however, this does make it require some manual configuration after
installation.

After installing, see /usr/doc/apcupsd-3.14.13/README.SLACKWARE for more
information on how to modify rc.6 and how to start the apcupsd daemon
automatically at boot.

Maintained by: Robby Workman
Keywords: backup,battery,ups,apc,power,nut
ChangeLog: apcupsd

Homepage:
http://www.apcupsd.org

Source Downloads:
apcupsd-3.14.14.tar.gz (cc8f5ced77f38906a274787acb9bc980)

Download SlackBuild:
apcupsd.tar.gz
apcupsd.tar.gz.asc (FAQ)

(the SlackBuild does not include the source)

Validated for Slackware 15.0

See our HOWTO for instructions on how to use the contents of this repository.

Access to the repository is available via:
ftp git cgit http rsync

© 2006-2024 SlackBuilds.org Project. All rights reserved.
Slackware® is a registered trademark of Patrick Volkerding
Linux® is a registered trademark of Linus Torvalds