SlackBuilds Repository

15.0 > Ham > gqrx-sdr (2.15.8)

Gqrx is a software defined radio receiver powered by the
GNU Radio SDR framework and the Qt graphical toolkit.
Gqrx supports many of the SDR hardware available,
including Funcube Dongles, rtl-sdr, HackRF and USRP devices.

Gqrx has the following features:

Discover devices attached to the computer.
Process I/Q data from the supported devices.
Change frequency, gain and apply various corrections (frequency, I/Q
AM, SSB, FM-N and FM-W (mono and stereo) demodulators.
Special FM mode for NOAA APT.
Variable band pass filter.
AGC, squelch and noise blankers.
FFT plot and waterfall.
Record and playback audio to / from WAV file.
Spectrum analyzer mode where all signal processing is disabled.

If you use a DVB-T dongle keep in mind newer kernels already
contains a DVB driver, however, we do not want to use this.
The above "modprobe -r dvb_usb_rtl28xxu" command unloads this
from the kernel, however for a permanent solution you will
need to create the following file in /etc/modprobe.d/:
rtl.conf and add this line: blacklist dvb_usb_rtl28xxu

This requires: gr-osmosdr

Maintained by: Panagiotis Nikolaou
Keywords: rtl-sdr,sdr,gnuradio
ChangeLog: gqrx-sdr


Source Downloads:
gqrx-2.15.8.tar.gz (4b28d6546f8ad5f3a13e3e59d937662d)

Download SlackBuild:
gqrx-sdr.tar.gz.asc (FAQ)

(the SlackBuild does not include the source)

Individual Files:

Validated for Slackware 15.0

See our HOWTO for instructions on how to use the contents of this repository.

Access to the repository is available via:
ftp git cgit http rsync

© 2006-2024 Project. All rights reserved.
Slackware® is a registered trademark of Patrick Volkerding
Linux® is a registered trademark of Linus Torvalds